Shandong Iron and Steel: One-step and two-step waste steel pool fog cannon automation upgrade project in steelmaking plant

　　To potential bidders:

　　Shandong Iron and Steel Group Rizhao Co., Ltd., a subsidiary of Shandong Iron and Steel Group Co., Ltd., is planning to conduct bidding and procurement for the one-step and two-step waste steel pool fog cannon automation upgrade project (EPC) of the steel plant. The relevant matters are announced as follows, and potential bids that meet the conditions are welcome. people, to participate in this tender.

　　1. Tendering Conditions

　　Name of the tenderee: Shandong Iron and Steel Group Rizhao Co., Ltd.

　　Tenderee's project name: One-step and two-step waste steel pool fog cannon automation upgrade project (EPC) in steelmaking plant

　　Project funding source: self-raised, project funding ratio: 100%.

　　The project has met the bidding conditions, and the project is now open for bidding.

　　2. Scope and content of the tender

　　1. Scope and content of the tender:

　　This tender is for Shandong Iron and Steel Group Rizhao Co., Ltd. (hereinafter referred to as Rizhao Company) Steel Plant One-step and Two-step Scrap Pool Fog Cannon Automation Upgrade Project (EPC).

　　Main construction contents: Add 6 sets of 40-meter intelligent tracking ultra-fine fog cannons in the first- and second-step scrap steel pool areas of the steelmaking plant, and add two 40-meter ultra-fine fog cannons in the first- and second-step steel slag areas; the original scrap steel pool area 6 conventional fog cannons from the factory were dismantled and replaced and moved to the scrap processing plant (2 units), 4 steel-making converter tapping side channels (4 units) and other areas for dust control; supporting construction of pipelines, water tanks, etc., related equipment and facilities Dismantling, installation, electrical and debugging, etc.

　　2. Planned construction period: 3 months, subject to the time of the commencement order.

　　3. Place of delivery: The location of the tenderee's factory (Shandong Iron and Steel Group Rizhao Co., Ltd., Lanshan Industrial Park, Rizhao City).

　　3. Qualification requirements for bidders

　　The qualification review for this tender will be post-trial. If the bidder does not meet one of the following conditions, the qualification review will be rejected and will not enter the next stage of review:

　　1. The bidder has an independent legal personality. The registered capital is not less than 10 million yuan.

　　2. Low qualification requirements: (1 and 2 must be possessed at the same time)

　　(1) Low design qualifications: Environmental Engineering Special (Air Pollution Prevention and Control Project) Grade B and above;

　　(2) Low construction qualifications: General contracting of mechanical and electrical engineering construction level 3 or environmental protection engineering professional contracting level 3 and above, and have a valid safety production license (bidders must provide the website URL link of the authoritative organization for query qualification and validity period).

　　3. Low performance requirements: The bidder must have at least 1 copy of the same or similar performance in the metallurgical industry since 2016 (subject to the signed contract).

　　4. Consortium bids are not accepted.

　　4. Instructions for Bidders

　　1. All the performances that meet the requirements since 2016 should be provided in the bidding documents (5 copies), and the copies of the project contract with the official seal should be provided for the performance (at least include: the basic information pages of both parties to the contract, the content of the construction work, the contract Signature page, contract signing time and contact information of the user, etc.), and the order of providing copies of performance should be consistent with the order of performance list. The above information should be provided with the original contract for future reference when bidding.

　　If the content of the contract cannot reflect the relevant content of intelligent control, it can be supported by the corresponding technical documents of the contract.

　　2. It has a good business reputation and a sound financial accounting system. It is required to provide the audit report audited by the accounting firm in the past three years (if the establishment is less than three years, the establishment date) and the new financial accounting statement, at least including Financial audit report signature page, balance sheet, cash flow statement, income statement.

　　3. The bidder must abide by the relevant laws and regulations of the state, and have no major illegal acts.

　　4. When the tenderee uses the services provided by the bidder, there is no known illegal situation, nor any known disputes related to third-party patent rights, copyrights, trademark rights or industrial design rights. If there is any allegation of infringement brought by the tenderee using the services provided by the tenderer, the tenderer shall bear full responsibility in accordance with the law.

　　5. The quantity and quality of the effective performance will be converted into the points assigned by the evaluation. If the bidder is lazy in providing it, it will affect the score this time, and the consequences will be at your own risk.

　　6. Project manager requirements: 1 person with the title of construction engineer certificate level 2 and above; and shall not be the project leader of other construction projects under construction, and provide bidders who are not less than 3 consecutive months in the past six months. Its social security payment records.

　　7. Requirements for the person in charge of construction: 1 person, with the second-level or above professional title of the construction engineer certificate, and provide the records of the bidders paying social security for not less than 3 consecutive months in the past six months.

　　Note: The person in charge of the project and the person in charge of construction can be the same person.

　　8. Other notes that need to be supplemented:

　　(1) The incoming and outgoing vehicles must adopt new energy vehicles or vehicles with China VI emission standards.

　　(2) Non-road mobile machinery must use new energy or meet the national three emission standards, and obtain an environmental protection registration code.

　　(3) In order to ensure the safe, orderly and civilized construction of the project, the bidder must be fully responsible for the safety protection measures and safe and civilized construction on the construction site. Sign a security agreement. In the process of project construction, completion, delivery and repair of any defects, the national and local laws, regulations, norms, standards and regulations on safety production shall always be observed, and their safety construction duties shall be performed in accordance with the relevant clauses of the contract for this project. .

　　(4) Not a unified organization for reconnaissance

　　If the bidder does not bid or provide information as required by the instructions, the bid evaluation committee will make a review that is unfavorable to the bidder; in order to ensure the fairness and impartiality of this procurement project, the bidder has the right to publicize and accept it in the bid-winning announcement. Social supervision; at the same time, the tenderee has the right to conduct market research, substantive examination and on-the-spot inspection on the authenticity and effectiveness of the above qualifications, performance, supply capacity and other relevant materials, and has the right to void the bidder's fraudulent behavior once it is found The bid or disqualification of the bid winner will be dealt with seriously in accordance with the relevant laws and regulations and the bidding documents.

　　5. Announcement and bidding registration time

　　March 18, 2022 to March 24, 2022. The first and second registrations are still valid.

　　6. Submission of bid documents, deadline for bids (bid opening time) and location of bid opening

　　1. Deadline for submission of bid documents (called bid deadline and bid opening time):

　　At 9:00:00 on April 8, 2022, the bidder should submit the bidding documents before the bidding deadline.

　　2. Methods of document submission and bid opening:

　　Electronic bidding: Submit electronic bidding documents through the procurement and auction information management platform of Shandong Iron and Steel Group Co., Ltd. (http://bams.shansteelgroup.com), you can refer to the platform homepage "Use Help" for operation, if you encounter technical problems on the website, please contact us in advance. Electronic platform contact 0531-67606687 or 0633-7920020.

　　If the bidder fails to bid successfully due to failure, it shall be deemed to have abandoned the bid. If electronic bidding is not possible due to special circumstances such as the Internet, with the consent of the tenderee, it can be sent to the mailbox designated by the tenderee before the deadline.

　　In this electronic bidding, the bidder does not need to go to the tenderee's site to wait for clarification and answering questions.

　　3. The tenderee will reject the tender documents that are not delivered to the designated location as required or overdue.

　　In this tender, one quotation is allowed, and no second quotation is allowed; only one unique quotation is allowed.

　　7. How to apply for bidding and obtain bidding documents

　　This tender is submitted online. All potential bidders who intend to participate should log in during the announcement period: http://bams.shansteelgroup.com. Bidders who participate in the bidding for the first time need to register on the platform. When registering, please refer to the "Use Help" on the homepage of the website. User registration, After the review is successful, you must change the initial password, log in again, and register (only fill in or upload the required fields with red stars when registering, and you can complete the registration. Due to the post-qualification review, after the registration is successful, no review will be conducted). Click to register, the projects that have been successfully registered will disappear, and the system will give a notification of successful registration. Don’t pay attention to the prompts such as “upload performance” and “payment” given by the system. After the bidder pays the bid fee, the bidder's finance will confirm within 2 working days. After confirmation, the bidder can directly download the bidding documents from the Internet with the registered account and password. If you have any questions during the period, please consult 0633- 7920919).

　　The bidding fee for this bidding project is 200 yuan. If the first and second times have been paid, there is no need to pay this time. Wire transfer or transfer from the basic account of the bidder to the account of the bidder (see "IX. Account Information of the Bidder"), and indicate the name or number of the bidding project in the bank remittance or transfer remarks ****; The bidder's name shall be indicated at the same time, otherwise, the tenderee has the right not to confirm, and the consequences arising therefrom shall be borne by the potential bidder.

　　The tender fee will only be issued with a receipt and will not be refunded. The receipt should be collected within one month, and no postal service is provided.

　　8. Bid bond

　　Form of bid bond: wire transfer or bank transfer.

　　The amount of the bid bond: RMB 30,000 (uppercase: 30,000 yuan), if the first and second payments have been made, this time there is no need to pay.

　　The bid bond shall be paid by wire transfer or transfer from the basic account of the bidder or other account confirmed by the bidder (accounts not recognized by the bidder, the bidder has the right to cancel the bid) to the bidder's account (details). See "IX. Account Information of the Tenderee"), no receipt will be issued for the convenience of return. And indicate the name of the bidding project **** in the bank remittance or transfer remarks column (if there is a subcontract, the package number must be indicated).

　　After the winning bid result is announced, the bid bond of the unsuccessful bidder will be refunded within 1 month; the bid bond of the successful bidder will be automatically converted into the wage bond of migrant workers. During the period, please refuse to inquire about the refund by telephone; if you have paid the bid bond, but fail to bid for any reason, please send the scanned copy of the bid bond receipt and the reason for return to the email sdgtrz@163.com to inform, and write in the "subject" of the email: Bidding Deposit + **** project + **** unit + contact person + contact information, the tenderee will reply in time after receiving the email.

　　After the successful bidder's performance bond is delivered, the performance bond refund application issued by the procurement department will be returned to the financial department (interest-free). (The successful bidder who pays the performance bond shall refer to the performance bond refund procedure for refund).

　　After the successful bidder's wage deposit for migrant workers has been delivered and ensured that the wages of migrant workers have been paid in place, the bidder will contact the finance department for refund (interest-free) based on the application for the refund of the wage deposit for migrant workers issued by the procurement department.

　　9. Account information of the tenderee (account for payment of bid fees and bid bond)

　　Account name of the tenderee: Shandong Iron and Steel Group Rizhao Co., Ltd.

　　Account Bank: Industrial Bank Co., Ltd. Rizhao Branch

　　Account: 523010100100371125

　　The payment should indicate the bidding project; otherwise, the tenderee has the right not to confirm, and the consequences arising therefrom shall be borne by the potential bidder.

　　10. Clarification and Q&A consultation

　　1. Before the deadline for bidding, the tenderee has the right to clarify the bidding documents, and the clarification documents will be published in the form of attachments on the bidding platform of the tenderee. If the release date is less than 15 days from the deadline for bidding, the bid opening date will be postponed accordingly or the bid opening date will be postponed. After consultation with the bidders, no extension will be made.

　　2. If the bidder requires the tenderee to answer questions on the bidding documents, it shall submit a clarification email to the tenderee 10 days before the deadline for bidding, and send the clarification email in PDF and word versions to the email address. Clarification should be indicated in the "subject" of the email: clarification + **** project + **** unit + contact person + contact information, if the information is not specified as required, the tenderee has the right to make a document that has not received clarification requirements deal with. The tenderee shall reply 5 days before the deadline for bidding, and the reply does not state the source of the problem.

　　3. The clarification of the bidding documents will be published on the http://bams.shansteelgroup.com platform. Potential bidders are requested to log in daily with their registered usernames and check whether there are any clarifications or supplementary documents and on-site clarifications in the registered projects. Notification and other information, the tenderee will no longer notify separately, once issued, it will be deemed to be served to all bidders, and the consequences caused by the failure to log in shall be borne by the bidders themselves.

　　11. Announcement media

　　This Bidding Announcement is simultaneously published on "China Procurement and Bidding Network" (http://www.chinabidding.com.cn) and the bidder's website (http://bams.shansteelgroup.com). If any media other than the above-mentioned media reprints or publishes information related to this tender, the tenderee does not assume any responsibility and reserves the right to pursue the responsibility of the relevant parties.

　　12. Contact address, contact person and contact information of the tenderee

　　Contact address: Shandong Iron and Steel Rizhao Company Office Building (Baidu map available) - Room 301, 3rd Floor, Area A, Dining Center (No. 1, Lingang Road, Donggang District, Rizhao City)

　　Consultation time:

　　Working Days Morning: 8:30-11:30 Afternoon: 13:00-16:30