Common continuous casting equipment

2022-06-08

        Common continuous casting equipment 　　Overall effect drawing of billet caster 　　Overall effect drawing of slab caster 　　1) Ladle turret 　　Ladle turntable is used to turn the...

Vertical continuous casting technology for flat and long products

2022-06-08

　　The vertical continuous caster was initially used in continuous casting technology. It is an important part of ingot production, which can greatly save operating costs. Arc continuous caster is a new type of improved continuo...

450mm × 2000mm！ The thickest vertical bending continuous caster in China has been successfully put into operation!

2022-06-08

　　On December 12, 2019, the one-time hot commissioning of 2 × continuous caster in the steelmaking plant of Minmetals Yingkou Medium Plate Co., Ltd. was successful, and the production section was 320mm × 2000mm; On ...

Raw materials for blast furnace ironmaking

2022-06-08

　　The raw materials for blast furnace smelting are mainly composed of iron ore, fuel (coke) and flux (limestone). 　　Generally, smelting 1 ton of pig iron requires 1.5-2.0 tons of iron ore, 0.4-0.6 tons of coke, 0.2-0.4 tons...

Study on morphology and composition of dust collected from different processes in iron and steel smelting process

2022-06-08

　　Abstract: a large number of pollutants will be produced in the process of iron and steel smelting. The annual emission of smoke and dust is huge. Particles are the main component of smoke and dust in iron and steel enterprise...

Fangda special steel 1000M ³ Progress of blast furnace ironmaking technology

2022-06-08

　　Abstract: the main experiences of Fangda special steel in blast furnace operation technology and management in recent years are summarized. Through continuous optimization of blast furnace operation, paying close attention to...